Point roundover bits are amazing tools! This point roundover bit allowed me to get a larger roundover on this tray than I would have been able to accomplish using traditional roundover bits on a router table due to the height of the tray. To do this I set the bit up as an 18 degree v-bit in the Vectric software and cut a profile on the inside and outside of the line to the depth of the point roundover bit. I've tried setting this up as a form tool, but can't seem to get it to cut correctly, this

Roundover bits are the most used in the shop for me. I think this was a 3/4" radius bit. What's your go to? For me it's probably the 1/8" bit; keep one in a trim router at all times. #woodworking #routerbits #reels #router #tools #woodshop #maker #diy #hobby | Boundary Fog Furniture

Rounding over small pieces on the CNC machine using the #56142 1/16" radius point roundover bit. Using the Stepcraft M.700 CNC machine, available on our website, I started off doing a profile cut with the @amanatool #46176-K 1/8" Spektra™ coated compression bit from @toolstoday. Be sure to check out the full project video, link in bio! - - - - - - - - #TeamTOOLSTODAY - - - - - - - - 46176-K RPM: 18,000 Feed Rate: 40ipm Plunge Rate: 20ipm Depth per pass: .25" - - - - - - - - After cutting the pro